ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine

ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine
ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine
ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine
ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine
ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine
ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine

ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine

PULSE, COLD, AC, DC TIG Welder. MIG Welder with Lift TIG MMA. MMA Stick Welder with Lift TIG. Plasma Cutter, 3 in 1, 2 in 1. ANDELI 200amp DC Inverter TIG Welder/MMA 2 IN 1 Welding Machine HF Start IGBT.

ANDELI DC Inverter TIG/MMA Welder 200A 250A Pulse TIG 250A Welding Machine IGBT. ANDELI 250amp AC DC Pulse TIG Welder Inverter Aluminium Welding Machine + Pedal. ANDELI 250amp AC DC Inverter TIG Welder/Pulse TIG/MMA Aluminium Welding Machine. ANDELI 200amp DC Inverter TIG Welder/COLD TIG/CLEAN/MMA 4 IN 1 Welding Machine. ANDELI 250amp HF DC Inverter TIG Welder/PULSE TIG/MMA 3 IN 1 Welding Machine. ANDELI 250amp AC DC Inverter TIG Welder/PULSE TIG/MMA Welding Machine Aluminium. ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine. ANDELI 250AMP DC INVERTER TIG/PULSE TIG/COLD TIG/CLEAN/MMA 5 IN 1 WELDER. This is a quality professional Pulse TIG/Hot TIG/Cold TIG/Clean/MMA 5 in 1 multi-process welding machine with a good compact portable design (only 7.3kg) which can be very easily operated and is suitable for welding steel, stainless steel, nickel alloys, copper, brass, bronze etc. Except aluminium and aluminium alloys so this welder is perfect for garage, farm, mobile technicians, DIY and other repair services. PULES TIG/HOT TIG/COLD TIG/CLEAN/MMA(ARC/STICK) 5 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter - L. Atest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT.

Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. COLD TIG function for special welding without discoloration and other useful welding.

Please note that this is a cold TIG welding process, so gas must be used, unlike the cold welding process where professional cold welding machines do not use gas. To watch what the Cold TIG Welding is.

We don't supply the cleaning & polishing fluid. To watch how to install the clean torch and clean the welding seam. Start/End Current and regulating Upslope/Downslope time.

Prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available. Determines the control of the operating mode and provides extended control over the current flow.

In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 - 10s. Pre-flow and Post flow time can be adjustable in the range 0 - 15s.

Protects the tungsten electrode against excessive wear and protects the weld from oxidation. Pulse frequency can be adjustable in the range 0.2 - 200Hz. Pulse duty ratio can be adjustable in the range 10% - 90%. Cold TIG welding time can be adjustable in the range 1 - 250ms.

Cold f requency of interval can be adjustable in the range 1-30 and if set'0' frequency which means manual control. High Frequency Ignition - Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. Please note that the preseted cold welding programs are controlled manually. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 - 4.0mm on MMA welding mode. Compact portable design and light weight. Comes with a 3m quality TIG torch.

Come with a 16 amp industrial plug. Please note this welding machine is not suitable for welding aluminium and aluminium alloys. ANDELI TIG-250PC DC inverter Welder, 3m TIG Torch, 2m Earth Lead, 2m MMA Lead, Instruction manual, Wire brush, Welding face mask, Torch Consumables Kit (3 gas nozzles in sizes: 4/5/6, 1 collet body and 3 collets in sizes: 1.6/2.0/2.4). AC 230V+/-15% 60-50Hz Single phase.

Pulse duty ratio (Pulse width). 410 x 165 x 305 mm.

Honest business and Excellent customer service have won us unanimous praise from customers.
ANDELI 250amp DC Inverter TIG Welder/PULSE/COLD/CLEAN/MMA 5 IN 1 Welding Machine


Home   Sitemap   Contact Form   Privacy Policy Agreement   Terms of service